1、Product size and property:
① Thickness, allowable width deviation and weight:
| Category | Grade | Product Thickness（mm） | Product Width（mm） | Unit Weight（T） | ||||
| Range of Thickness （mm） |
Allowable Deviation （mm） |
Thickness （mm） |
Allowable Deviation（mm） | |||||
| Trimmed | Not Trimmed | |||||||
| Common carbonstructural steel | Q195 SPCC DC01 DC03 08Al |
≤0.15 | -0.015 | ≤0.50 ＞0.5～1.00 ＞1.00～3.00 |
-0.2 -0.25 -0.3 |
±2.00 | Small＜1.5ton Big＜2.5ton |
|
| 0.15～0.25 | -0.02 | |||||||
| 0.25～0.40 | -0.03 | |||||||
| 0.41～0.60 | -0.04 | |||||||
| 0.61～0.80 | -0.04 | |||||||
| 0.81～1.00 | -0.05 | |||||||
| 1.01～1.20 | -0.06 | |||||||
| High quality carbonstructural steel | 45 50 60 40Mn 45Mn 65Mn |
1.21～1.50 | -0.07 | ≤0.50 ＞0.5～1.00 ＞1.00～4.00 |
-0.2 -0.25 -0.3 |
Width≤50 | Width＞50 | ＜1.5ton |
| 1.51～2.00 | -0.08 | +2 -1 |
+3 -2 |
|||||
| 2.01～2.50 | -0.09 | |||||||
| 2.51～3.00 | -0.1 | |||||||
| ＞3.00～3.50 | -0.12 | |||||||
| Alloy Steel | 50CrV4 | ＞3.50～4.00 | -0.15 | |||||
| Note: 1. For product thickness ≤0.5mm, the allwable thickness deviation is ±0.01mmbigger than the value in the above table; For product thickness ＞0.5mm, the allwable thickness deviation is ±0.02mmbigger than the value in the above table.2. We can provide customized steel strip according to customers' needs (the deviation value should not exceed the range in the above table). |
||||||||
② Physical Properties:
| Category | Grade | State | Tensile Testing | Hardness Testing | |
| Tensile Strength (MPa） |
Elongation（%） | Vickers Hardness（HV） | |||
| Common carbonstructural steel | Q195 SPCC DC01 DC03 08Al |
TM | 275～380 | ≥32 | 86～120 |
| M | 285～400 | ≥32 | 90～125 | ||
| HM | 285～400 | ≥30 | 90～125 | ||
| MP | 320～450 | ≥35～45 | 105～145 | ||
| Y2 | 340～785 | —— | 105～230 | ||
| Y | 580～785 | —— | 180～230 | ||
| High quality carbonstructural steel | 45 50 60 40Mn 45Mn 65Mn |
Y | ＞800～865 | —— | ＞250～270 |
| Y2 | ＞610～900 | —— | 190～280 | ||
| MP | ＞530～675 | ≥10～15 | 160～210 | ||
| M | 480～610 | ≥20～22 | 150～190 | ||
| TM | 415～545 | ≥22～24 | 130～170 | ||
③ Cupping Test Standard:
| Category | Grade | State | Thickness（mm） | |||||||
| 0.13～0.17 | 0.18～0.22 | 0.23～0.27 | 0.28～0.32 | 0.33～0.37 | 0.38～0.42 | 0.43～0.47 | 0.48～0.52 | |||
| Common carbonstructural steel | Q195 SPCC DC01 DC03 08Al |
TM | 7.4～7.6 | 7.8～8.0 | 8.0～8.4 | 8.2～8.7 | 8.4～8.8 | 8.5～8.8 | 8.7～9.1 | 9.0～9.3 |
| M | —— | —— | —— | 7.2～7.5 | 7.6～7.8 | 8.0～8.1 | 8.2～8.5 | 8.6～8.9 | ||
| MP | 6.2～7.0 | 7.2～7.6 | 7.6～8.0 | 8.0～8.5 | 8.3～8.6 | 8.5～8.7 | 8.6～8.9 | 8.8～9.2 | ||
2、Chemical Composition：
① Chemical composition of common products
| Category | Grade | Chemical Composition（%） | |||||||||
| C | Mn | P | S | Si | Ni | Cr | Cu | Alt | Als | ||
| Common carbonstructural steel | Q195 | ≤0.12 | ≤0.5 | ≤0.035 | ≤0.04 | ≤0.30 | ─ | ─ | ─ | ─ | ─ |
| SPCC | ≤0.06 | ≤0.60 | ≤0.035 | ≤0.035 | ─ | ─ | ─ | ─ | ─ | ─ | |
| DC01 | ≤0.12 | ≤0.50 | ≤0.045 | ≤0.045 | ─ | ─ | ─ | ─ | ≥0.020 | ─ | |
| DC03 | ≤0.08 | ≤0.45 | ≤0.035 | ≤0.035 | ─ | ─ | ─ | ─ | ≥0.020 | ─ | |
| 08Al | ≤0.10 | ≤0.45 | ≤0.030 | ≤0.030 | ≤0.030 | ≤0.030 | ≤0.10 | ≤0.25 | 0.02～0.07 | 0.015～0.065 | |
| Common carbonstructural steel | 45 | 0.42～0.50 | 0.50～0.80 | ≤0.035 | ≤0.035 | 0.17～0.37 | ≤0.25 | ≤0.25 | ≤0.25 | ─ | ─ |
| 50 | 0.47～0.55 | 0.50～0.80 | ≤0.035 | ≤0.035 | 0.17～0.37 | ≤0.030 | ≤0.15 | ≤0.25 | ─ | ─ | |
| 60 | 0.57～0.65 | 0.50～0.80 | ≤0.035 | ≤0.035 | 0.17～0.37 | ≤0.25 | ≤0.25 | ≤0.25 | ─ | ─ | |
| 40Mn | 0.37～0.44 | 0.70～1.00 | ≤0.035 | ≤0.035 | 0.17～0.37 | ≤0.030 | ≤0.25 | ≤0.25 | ─ | ─ | |
| 45Mn | 0.42～0.50 | 0.70～1.00 | ≤0.035 | ≤0.035 | 0.17～0.37 | ≤0.25 | ≤0.25 | ≤0.25 | ─ | ─ | |
| 65Mn | 0.62～0.70 | 0.90～1.20 | ≤0.035 | ≤0.035 | 0.17～0.37 | ≤0.25 | ≤0.25 | ≤0.25 | ─ | ─ | |
| Category | Telephone | Fax | Address |
| Jiaxing Office | 0572-5135595 | 0572-5135695 | No.295 Lingzhi West Road, Anji County |
| Ningbo Office | 0574-87435132 | 0574-87435132 | Room308, 50# Long 819,Baizhang East Road, Huaqiaocheng, Jiangdong District, Ningbo |
| Wenzhou Office | 0577-61803707 | 0577-61803707 | B-805, Liushi Mansion, Leqing, Zhejiang Province |
| Anhui Office | 0553-5316792 | 0553-5316795 | No.7 Hongqi Road, Qiaobei Industrial Park, Wuhu Economic and Technological Development Zone |
| Jiangsu Office (Strip) | 0553-5316792 | 0553-5316795 | No.7 Hongqi Road, Qiaobei Industrial Park, Wuhu Economic and Technological Development Zone |
| Jiangsu Office (Tube) | 0553-5316792 | 0553-5316795 | No.7 Hongqi Road, Qiaobei Industrial Park, Wuhu Economic and Technological Development Zone |
| Guangdong Office | 0553-5317733 | 0553-5317733 | No.7 Hongqi Road, Qiaobei Industrial Park, Wuhu Economic and Technological Development Zone |
